Installation guide

B – Command Line Interface
CIMListener Command
B-12 59042-08 A
0
CIMListener Command
Configures CIM indication service listeners and adds subscriptions to listeners.
Refer to the “CIMSubscription Command” on page B-14 for information about
configuring subscriptions.
Authority Admin session and a CIM Edit session. Refer to the “CIM Command” on
page B-11 for information about opening a CIM edit session.
Syntax cimlistener
add [listener_name] [subscription_list]
create [listener_name]
delete [listener_name]
edit [listener_name]
Keywords add [listener_name] [subscription_list]
Adds the set of subscriptions given by [subscription_list] to the listener given by
[listener_name]. Use a <space> to delimit subscription names in
[subscription_list].
create [listener_name]
Prompts you in a line-by-line fashion to create a CIM listener with the name given
by [listener_name]. [listener_name] can have up to 32 characters: 0-9, A-Z, a-z, _,
$, ^, and -. The CIM listener configuration parameters are described in Table B-3.
delete [listener_name]
Deletes the listener given by [listener_name] from the CIM database.
edit [listener_name]
Opens an editing session in which you can modify the CIM listener given by
[listener_name]. Refer to Table B-3 for a description of the CIM listener
configuration parameters.
Table B-3. CIM Listener Configuration Parameters
Parameter Description
Name Listener name
Type Listener type:
 Permanent – Send indications to the CIM client
whether a connection can be established or not. This
is the default.

Transient – Sends indications to the CIM client, but
ceases if a connection cannot be established after 60
minutes.
URL IP address of the CIM client and the port number to which to
send indications. The default is 10.0.0.1:5000.