Installation guide

B – Command Line Interface
Show Command
B-94 59042-08 A
0
timezone
Displays the current time zone setting.
topology
Displays all connected devices.
users
Displays a list of logged-in users. This is equivalent to the User List command.
version
Displays an introductory set of information about operational attributes of the
switch. This keyword is equivalent to the About keyword.
Examples The following is an example of the Show Chassis command:
SANbox2 #> show chassis
Chassis Information
-------------------
BoardTemp (1) - Degrees Celsius 34
BoardTemp (2) - Degrees Celsius 31
FanStatus (1) Good
PowerSupplyStatus (1) Good
HeartBeatCode 1
HeartBeatStatus Normal
BeaconOnStatus Beacon status as set by the Set Beacon
command.
OperationalState Switch operational state
PrincipalSwitchRole Principal switch status. True indicates
that this switch is the principal switch.
BoardTemp (1) - Degrees Celsius Internal switch temperature at circuit
board sensor 1
BoardTemp (2) - Degrees Celsius Internal switch temperature at circuit
board sensor 2
SwitchDiagnosticsStatus Results of the power-on self test
SwitchTemperatureStatus Switch temperature status: normal,
warning, failure
Table B-28. Switch Operational Parameters (Continued)
Parameter Description