Manual

[phone] www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
129
(4) Configure Router Lifespan
Command
Explanation
Interface Configuration Mode
ipv6 nd ra-lifetime <seconds>
no ipv6 nd ra-lifetime
Configure Router advertisement Lifespan. The NO
command resumes default value (1800 seconds).
(5) Configure router advertisement Minimum Interval
Command
Description
Interface Configuration Mode
ipv6 nd min-ra-interval <seconds>
no ipv6 nd min-ra-interval
Configure the minimum interval for router
advertisement. The NO command resumes default
value (200 seconds).
(6) Configure router advertisement Maximum Interval
Command
Explanation
Interface Configuration Mode
ipv6 nd max-ra-interval <seconds>
no ipv6 nd max-ra-interval
Configure the maximum interval for router
advertisement. The NO command resumes default
value (600 seconds).
(7) Configure prefix advertisement parameters
Command
Explanation
Interface Configuration Mode
ipv6 nd prefix
<ipv6-address/prefix-length> <valid-
lifetime> <preferred-lifetime> [off-link]
[no-autoconfig]
no ipv6 nd prefix
<ipv6-address/prefix-length> <valid-
lifetime> <preferred-lifetime> [off-link]
[no-autoconfig]
Configure the address prefix and advertisement
parameters of router. The NO command cancels
the address prefix of routing advertisement.
(8) Configure static IPv6 neighbor Entries
Command
Explanation
Interface Configuration Mode
ipv6 neighbor <ipv6-address>
<hardware-address> interface
Set static neighbor table entries, including neighbor
IPv6 address, MAC address and two-layer port.