Manual

[phone] www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
247
Interface Configuration Mode
ip dvmrp enable| ip pim dense-mode |
ip pim sparse-mode
Enable IGMP Protocol, the corresponding
commands “no ip dvmrp enable| no ip pim
dense-mode | no ip pim sparse-mode” disable
IGMP Protocol. (Required)
Configure IGMP Sub-parameters
(1) Configure IGMP group parameters
Configure IGMP group filtering conditions
Configure IGMP to join in group
Configure IGMP to join in static group
Command
Explanation
Interface Configuration Mode
ip igmp access-group {<acl_num |
acl_name>}
no ip igmp access-group
Configure the filtering conditions of the interface to
IGMP group; the “no ip igmp access-group”
command cancels the filtering condition.
ip igmp join-group <A.B.C.D >
no ip igmp join-group <A.B.C.D >
Configure the interface to join in some IGMP group,
the “no ip igmp join-group <A.B.C.D >” command
cancels the join.
ip igmp static-group <A.B.C.D >
no ip igmp static-group <A.B.C.D>
Configure the interface to join in some IGMP static
group; the “no ip igmp static-group <A.B.C.D >”
command cancels the join.
(2) Configure IGMP Query parameters
Configure interval for IGMP to send query messages
Configure the maximum response time of IGMP query
Configure the time-out of IGMP query
Command
Explanation
Interface Configuration Mode
ip igmp query-interval <time_val>
no ip igmp query-interval
Configure the interval of IGMP query messages
sent periodically; the “no ip igmp query-interval”
command restores default value.
ip igmp query-max-response-time
<time_val>
no ip igmp query-max-response-time
Configure the maximum response time of the
interface for IGMP query; the “no ip igmp query-
max-response-time” command restores default
value.
ip igmp query-timeout <time_val>
no ip igmp query-timeout
Configure the time-out of the interface for IGMP
query; the “no ip igmp query-timeout” command