Manual

[phone] www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
275
2 Multiple other-rp-addresses can be configured in
accordance with one anycast-rp-addr, Once the register
message from a DR is received, it should be forwarded to
all of this RP one by one.
No operation will cancel other-rp-address communicating
with this router.
29.3.3 ANYCAST RP v6 Configuration Examples
The ANYCAST RP v6 function of a router
The following is the configuration steps:
RP1 Configuration:
Switch#config
Switch(config)#interface loopback 1
Switch(Config-if-Loopback1)#ipv6 address 2006::1/128
Switch(Config-if-Loopback1)#exit
Switch(config)#ipv6 pim rp-candidate loopback1
Switch(config)#ipv6 pim bsr-candidate vlan 1
Switch(config)#ipv6 pim multicast-routing
Switch(config)#ipv6 pim anycast-rp
Switch(config)#ipv6 pim anycast-rp self-rp-address 2003::1
Switch(config)#ipv6 pim anycast-rp 2006::1 2004::2
RP2 Configuration:
Multicast
Server
VLAN1:2000::10
0
VLAN1:2003::1
VLAN2:2001::2
VLAN2:2001::1
VLAN2:2004::2
VLAN1:2005::
2
receiver
receiver
receiver
RP2
RP1
DR
………