Manual

[phone] www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
339
Switch (config)# interface ethernet1/0/2
Switch (Config-If-Ethernet1/0/2)#sflow rate input 20000
Switch (Config-If-Ethernet1/0/2)#sflow rate output 20000
Switch (Config-If-Ethernet1/0/2)#sflow counter-interval 40
38.4 sFlow Troubleshooting
In configuring and using sFlow, the sFlow server may fail to run properly due to physical
connection failure, wrong configuration, etc. The user should ensure the following:
Ensure the physical connection is correct
Guarantee the address of the sFlow analyzer configured under global or port mode is
accessible.
If traffic sampling is required, the sampling rate of the interface must be configured
If statistic sampling is required, the statistic sampling interval of the interface must be
configured
If the examination remains unsolved, please contact with the technical service center of our
company.