Manual

[phone] www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
343
<key-id>]
no ntp server {<ip-address> | <ipv6-
address>}
3. To configure the max number of broadcast or multicast servers supported by the NTP client
Command
Explication
Global Mode
ntp broadcast server count <number>
no ntp broadcast server count
Set the max number of broadcast or multicast
servers supported by the NTP client. The no
operation will cancel the configuration and
restore the default value.
4. To configure time zone
Command
Explication
Global Mode
clock timezone WORD {add | subtract} <0-
23> [<0-59>]
no clock timezone WORD
This command configures timezone in global
mode, the no command deletes the configured
timezone.
5. To configure NTP access control list
Command
Explication
Global Mode
ntp access-group server <acl>
no ntp access-group server < acl>
To configure NTP server access control list.
6. To configure NTP authentication
Command
Explication
Global Mode
ntp authenticate
no ntp authenticate
To enable NTP authentication function.
ntp authentication-key <key-id> md5
<value>
no ntp authentication-key <key-id>
To configure authentication key for NTP
authentication.
ntp trusted-key <key-id>
no ntp trusted-key <key-id>
To configure trusted key.