User manual

104 | Getting Connected
Connect through a USB Port
To connect through a USB port, you need to first set up a USB modem
on your PC. Before setting up a USB modem, verify that you have the
following files:
• USBMDM
• USBModem_Dialer
Both files are available on the Getting Started CD. Run the Getting
Started CD from the CD-ROM of your PC and do the following on your
device:
1. On your device, tap Start > Programs > Wireless Modem.
2. Select USB as the connection type, and insert the USB cable
adapter.
3. Tap Start on the Wireless Modem screen of your device.
The Found New Hardware message appears on your PC.
4. On your PC, select Display a list of the known drivers for this
device so that I can choose a specific driver and click Next.
5. In the Hardware types list, select Modem and click Next.
6. Click Next.
7. Click Have Disk.
8. Click Next.
9. Select the recognized USB Modem from the Modems list.
10. Click Next.
11. Click Finish.
12. On your PC, click Start, click Settings, and click Control Panel.
13. Double-click Phone and Modem Options.
14. Select the new USB modem from the Modems list.
15. Double-click the USB Modem Dialer file on the Getting Started
CD.
16. Enter the GPRS settings (enter the APN assigned by your ISP)
17. Click Dial to start the connection.