User manual

Getting Connected | 107

• Conﬁgure Wireless Networks screen. This screen displays the

wireless networks currently available and allows you to add new

ones if available.

Note WLAN (Wi-Fi) is the default wireless channel setting for your device.

However, GPRS starts by default if your device does not detect any Wi-

Fi signal.

To connect to a Wi-Fi network

Wireless Manager

Wireless LAN

1. Tap Start > Settings > Connections tab > Wireless WLAN.

This opens the Wireless LAN Main screen.

2. Tap to open Wireless Manager.

3. Tap On corresponding to WLAN icon ( ).

The WLAN icon is highlighted to indicate that Wi-Fi is turned

on.

4. Tap Settings to conﬁgure and connect to a Wi-Fi network.

Note Tap on the Wireless LAN Main screen to configure wireless

networks and network adapters.