Installation guide

Quadro Manual I: Installation Guide Step 2: Configuring the Quadro
Quadro2x, 2xi, Quadro4x, 4xi, 4xa, Quadro16x, 16xi; (SW Version 4.1.x) 29
WAN IP Configuration
Your Internet Service Provider (ISP) should provide this information.
• Assign automatically via DHCP - The parameters are set automatically by the ISP.
This is common with cable modem and DSL service.
• Assign Manually requires the administrator to enter the external IP Address, the cor-
responding Subnet Mask, and the IP address of the Standard Gateway. This is
common when you have a static IP address with your ISP.
Fig. I-26: WAN IP Configuration page
Click on Next to display the WAN Interface Configuration page.