Installation guide

Quadro Manual I: Installation Guide Step 2: Configuring the Quadro
Quadro2x, 2xi, Quadro4x, 4xi, 4xa, Quadro16x, 16xi; (SW Version 4.1.x) 33
Step 2.4: Firewall Configuration
By default, Firewall configuration on the Quadro has medium security, which denies any in-
coming traffic from the WAN except for voice traffic.
Disabling the firewall is only required to access the Quadro’s management when the
Quadro is connected behind a router. To disable the firewall, open Firewall Configuration
from the Internet Uplink menu. Disable the firewall by deselecting the corresponding
checkbox and save changes.
Fig. I-31: Firewall Configuration page