Installation guide

Quadro Manual I: Installation Guide Step 2: Configuring the Quadro
Quadro2x, 2xi, Quadro4x, 4xi, 4xa, Quadro16x, 16xi; (SW Version 4.1.x) 35
In the Line Appearances text box, enter the number for simultaneous calls supported by
the SIP IP phone – which is the sum of the number of active and held calls. For example, if
this field is set to 1, only one active call is possible to have on the phone and making or ac-
cepting a second call while the other is on hold will not be allowed. Note, that this number
depends on the phone brand and model, and cannot exceed the number of simultaneous
calls supported by the phone.
To simplify the configuration procedure, Quadro generates unique identification parameters
(see Username and Password). You may use either these values or specify new ones.
Press Save to apply the settings for the IP line.
Reset the SIP Phone. After restart, the appropriate configuration will be automatically
downloaded from the Quadro to the SIP Phone.
Please Note: If you have decided to make the IP phone configuration manually, it is rec-
ommended to select the Other option from the Phone Model drop down list and to make
the configuration manually on the SIP phone also. The SIP phone’s configuration is differ-
ent dependent on the SIP phone model. For more information about SIP Phone configura-
tion, refer to the SIP phone manual or user’s guide.
Some SIP phones require only reboot for configuration download. Other SIP Phones may
require additional configuration. For example, by default IP Dialog SIP Tone II is in non-
auto-provisioning mode, therefore the user has to manually enable it on the phone.
To make sure the line configuration works properly, do the following:
• Go to Quadro Status- SIP Registration status – Registered IP Lines to see if
IP Line registration is successful.
• Dial *74 to get the line information.
• Make outgoing and accept incoming calls.
To make the IP line functional (for example, to be able to make/receive calls), refer to the
Step 4: Making/Receiving Calls and Appendix: Registering on Epygi’s SIP Server chapters
further in this guide, with the difference that the extensions should be attached to the con-
figured IP line.