Installation guide
Quadro Manual I: Installation Guide Step 2: Configuring the Quadro
Quadro2x, 2xi, Quadro4x, 4xi, 4xa, Quadro16x, 16xi; (SW Version 4.1.x) 36
Supported SIP Phones
Below is the list of SIP phones that are officially supported by Epygi and can be automati-
cally configured to work with Quadro2x/4x/16x:
• Snom 300 (Application version snom300-SIP 6.5.1)
• Snom 320 (Application version snom320-SIP 6.5.1)
• Snom 360 (Application version snom360-SIP 6.5.1)
• Aastra 480i (Firmware version 1.4.1.1077)
•
Aastra 9112i (Firmware version 1.4.1.1077)
• Aastra 9133i (Firmware version 1.4.1.1077)
• QCM (Software version 4.1.5)
Below is the list of SIP phones that are tested with the Quadro but may cause problems
when using some of the IP Phone related features:
• Snom 190
• Snom 200
• Snom 220
• Sipura SPA-841 IP
• Polycom Soundpoint IP 300SIP
• Cisco IP Phone 7960
• Swissvoice IP 10S
• IP Dialog SIP Tone II