Installation guide

Quadro Manual I: Installation Guide Step 3: Registering on Epygi’s Technical Support
Quadro2x, 2xi, Quadro4x, 4xi, 4xa, Quadro16x, 16xi; (SW Version 4.1.x) 42
WAN Interface Configuration Page
If PPPoA or Ethernet is the selected WAN Interface Protocol, the WAN Interface Configu-
ration page of the Internet Configuration Wizard shows additionally the ATM Bridge Set-
tings (ATM) area.
Fig. I-41: Internet Configuration Wizard - WAN Interface Configuration page for ADSL Quadros (PPPoA/Ethernet)
The ATM Bridge Settings manipulation radio buttons group is present if PPPoA, 1483B or
1483R WAN Interface Protocol has been selected and if the Quadro has corresponding
ADSL or G.SHDSL interface. Use Default selection to use the preconfigured parameter set
or select Manual and define corresponding VPI, VCI and Encapsulation parameters
should be specified manually.
Choose the select button to locate a defaulted ADSL or G.SHDSL provider with pre-
configured parameter settings. If you don't find your provider in this list, you need to select
manual. If you select manual, enter the values for VPI, VCI and Encapsulation your
ADSL or G.SHDSL provider recommends.