User Manual

SAFETY DATA SHEET
According to the Hazardous Products Regulations
Quaker State Ultimate Durability SAE 5W-30
Full Synthetic Motor Oil
Version
1.2
Revision Date:
2016-04-28
SDS Number:
800001028740
Print Date: 2016-04-29
Date of last issue: 07.04.2016
Date of first issue: 12.03.2013
8 / 14 800001028740
CA
pH : Not applicable
pour point : -45 °C / -49 °F
Method: ASTM D97
Initial boiling point and boiling
range
: > 280 °C / 536 °F
estimated value(s)
Flash point : 227 °C / 440 °F
Method: ASTM D93 (PMCC)
Evaporation rate : Data not available
Flammability (solid, gas) : Data not available
Upper explosion limit : Typical 10 %(V)
Lower explosion limit : Typical 1 %(V)
Vapour pressure : < 0.5 Pa (20 °C / 68 °F)
estimated value(s)
Relative vapour density : > 1
estimated value(s)
Relative density : 0.8483 (15 °C / 59 °F)
Density : 848.3 kg/m3 (15.0 °C / 59.0 °F)Method: ASTM D287
Solubility(ies)
Water solubility : negligible
Solubility in other solvents : Data not available
Partition coefficient: n-
octanol/water
: Pow: > 6
(based on information on similar products)
Auto-ignition temperature : > 320 °C / 608 °F
Viscosity
Viscosity, dynamic : Data not available
Viscosity, kinematic : 57 mm2/s (40.0 °C / 104.0 °F)
Method: ASTM D445
10.41 mm2/s (100 °C / 212 °F)
Method: ASTM D445
Explosive properties : Not classified