Owner's manual

PRO-LINE FIXED Roong Brackets

Durable all steel welded construction with sizes to t specic,

common roof surfaces. Can be easily installed and removed

without damaging shingles. The capacity for scaffolding support

models is one worker per 8 foot staging plus 40lbs., with a

maximum of 8 feet between brackets.

Powder Coated • Reinforced, Welded Gusset •

Rounded Corners eliminate shingle damage

PROFESSIONAL DUTY • FIXED PITCH ROOFING BRACKETS

ROOFING

PRODUCTS

For use on FIXED PITCH ROOFS 21/12 PITCH

Model #3503 8" x 60º

Model #3506 6" x 60º

For use on FIXED PITCH ROOFS 12/12 PITCH

Model #3501 10" x 45º

Model #3504 8" x 45º

Model #3507 6" x 45º

USE ONLY AS A SLIDEGUARD OR MATERIAL SUPPORT

Model #3505 6" x 90º

Model #3502 8" x 90º

FOR USE AS MATERIAL SUPPORT ONLY

Model #3508 4" x 90º

Product Specications

3506 3507 3508

6” x 60 Degree 6” x 45 Degree 4” x 90

Welded w/Gusset Welded w/Gusset Welded

12 / Carton 12 / Carton 12 /Carton

31 lbs 33 lbs 26 lbs

.57 cu. ft. .57 cu. ft. .35 cu. ft.

Model # 3501 3502 3503 3504 3505

Description: 10” x 45 Degree 8” x 90 Degree 8” x 60 Degree 8” x 45 Degree 6” x 90 Degree

Welded w/Gusset Welded w/Gusset Welded w/Gusset Welded w/Gusset Welded w/Gusset

Unit Pack: 12 / Carton 12 / Carton 12 / Carton 12 / Carton 12 / Carton

Weight p/Pack: 43 lbs 40 lbs 39 lbs 37 lbs 33 lbs

Cu. Ft. p/Pack: 1.07 cu. ft. .69 cu. ft. .92 cu. ft. .74 cu. ft. .50 cu. ft.

Customer Support and Ordering Information

781-344-1000 • www.qualcraft.com

Industries • 1551 Central Street

PO Box 559 • Stoughton, MA 02072

Material Support Only

PAGE 1
ROOFING PRODUCTS PROFESSIONAL DUTY • FIXED PITCH ROOFING BRACKETS PRO-LINE FIXED Roofing Brackets Durable all steel welded construction with sizes to fit specific, common roof surfaces. Can be easily installed and removed without damaging shingles. The capacity for scaffolding support models is one worker per 8 foot staging plus 40lbs., with a maximum of 8 feet between brackets.
PAGE 2
ROOFING PRODUCTS PROFESSIONAL DUTY • FIXED PITCH ROOFING BRACKETS 45˚ INSTRUCTIONS FOR INSTALLATION AND USE OF THE MODEL #2501 & #3501 10”x 45 DEGREE, MODEL #3504 8” x 45 DEGREE PITCH ROOFING BRACKET (FOR USE ON 12/12 PITCH ROOFS): CAPACITY: One worker per 8 feet of scaffolding plus 40 pounds of materials. GENERAL REQUIREMENTS: When installed, the platform support arm must be set to match the pitch of the roof, allowing for the installation of a fully decked and level walk surface.