Operation Manual

20
17B Assembly
Step 5 :
1. Secure Bolt No.S34 and Washer No.S24 (4 pieces each) to corresponding places as shown below.
2. Take Allen wrench M10 to tightly secure all 10 places on step 3-5.
Step 6 :
1. Take No. 54 motor cover which was removed from step 2, and place cover onto the right position.
2. Use 6 pieces of No. 56 screws to secure motor cover in place.
Allen wrench M10*1
Bolt No.S34*4PCS
Washer NO.S24*4PCS
CAUTION
Because this treadmill console is a touch panel screen, please note
the following safety pointers :
1. Do not use sharp objects to operate the touch screen
2. Do not knock on the touch screen
3. Do not splash water on the touch screen.
4. Use only dry soft cloth to wipe and clean the screen.
NO.56*6PCS