Operation Manual

Assembly

Step 7 :

1. Take out the odometer panel with handle part from the small box included in packaging.

2. Place the odometer panel in place and connect all cables according to picture shown below.

3. After connecting all cables, place the console in upright position bars correctly.

4. Secure Bolt No.S33 and Washer No.S6 (8 pieces each) to corresponding places as shown in picture below.

5. Use Allen wrench M5 to secure the 8 bolts tightly.

Step 8 :

1. Double check step 1-8 are completed correctly.

2. Please take out Safety Key No.1-33 and place it in the center position of the odometer panel.

Allen wrench M5*1

Washer NO.S6*8PCS

Bolt NO.S33*8PCS

#1-33