Operation Manual

23
19B
Trouble Shooting
JK010001 T1100TFT 10105(00)
Inverter Error Message
Item Display message Trouble shooting
1 Low Voltage
2
Thermo Sensor Abnormal
3 PFC Abnormal
4 Grounding Fault
Turn off machine for 1 minute, turn on again for confirmation
5 Over Current
6 Over Voltage
7 Over Heat
8 Motor Over Load
9 Inverter Over Load
10 System Over Load
Turn off and lubricate running belt & turn machine back on again.
11
Flash Program Error
12 EEPROM Error
13 Low Voltage
14 Driver Setting Error
15 Too Low Power
16 Too High Power
17 Heat Warning
Replace a new inverter
Incline Motor Error Message
Item Error message Trouble Shooting
1 Incline motor error
1. Check if the cables are disconnectd or damaged.
2. Replace a new incline motor.
Cushion Error Message
Item Error message Trouble Shooting
1 Shock resetting FAIL!
Please Call for Service
2
Shock adjusting FAIL!
Please Call for Service
1. Check if the cables are disconnectd or damaged.
2. Replace a new incline motor.
Weight Mode Error Message
Item Error message Trouble Shooting
1 Weight overload
1. Turn off for 1 minute, turn on again for confirmation.
2. Replace the weight sensor & controller set.
2 Weight low count
3 Weight over count
4 Weight EEPROM error
1. Check if the cables are disconnected or damaged.
2. Replace the weight sensor & controller set.