Reference Guide

Chapter 4 SCSI Commands
LOG SENSE Command (4Dh)
DLT-S4 Interface Reference Guide 70
Figure 29 Read / Write Error
LOG SENSE Pages — Header
Format
Table 41 Read / Write Error
LOG SENSE Header — Field
Descriptions
Figure 30 Log Parameters
Format for Read / Write Error
LOG SENSE Page
Bit
Byte
7 6 5 4 3 2 1 0
0 Page Code
1 Reserved
2 — 3
(MSB)
Page Length
(LSB)
Field Description
Page Code Echoes the page code specified in the
LOG SENSE CDB.
Page Length Specifies the total number of bytes contained in this log
page, excluding the 4 bytes that make up the header.
Bit
Byte
7 6 5 4 3 2 1 0
0 — 1
(MSB)
Parameter Code
(LSB)
2 DU DS TSD ETC TMC LBIN LP
3 Parameter Length
4 — n
(MSB)
Parameter Value
(LSB)