Reference Guide

Chapter 4 SCSI Commands
LOG SENSE Command (4Dh)
DLT-S4 Interface Reference Guide 77
Temperature Log Page
(0Dh)
4
This page provides a standardized way to report the device temperature.
Figure 35 Temperature LOG
SENSE Page — Header
Format
Table 47 Temperature LOG
SENSE Header
— Field
Descriptions
Parameter
Control Byte
(Continued
TSD 1 Target Save Disable.
ETC 0 Enable Threshold Comparison.
TMC 0 Threshold Met Criteria.
LBIN 0 List Binary.
LP 0 List Parameter.
Parameter
Length
Specifies the number of bytes in the parameter value. All parameters are 8 bytes in
length.
Parameter
Value
Indicates the actual value of this log parameter.
Bit
Byte
7 6 5 4 3 2 1 0
0 Page Code (0Dh)
1 Reserved
2 — 3
(MSB)
Page Length
(LSB)
Field Description
Page Code Echoes the page code specified in the
LOG SENSE CDB.
Page Length Specifies the total number of bytes contained in this log
page, excluding the 4 bytes that make up the header.
Field Description