Reference Guide

Chapter 4 SCSI Commands
LOG SENSE Command (4Dh)
DLT-S4 Interface Reference Guide 84
Figure 40 TapeAlert LOG
SENSE Page — Header
Format
Table 52 TapeAlert Page LOG
SENSE Header — Field
Descriptions
Figure 41 TapeAlert LOG
SENSE Page — Parameters
Format
Bit
Byte
7 6 5 4 3 2 1 0
0 Page Code (2Eh)
1 Reserved
2 — 3
(MSB)
Page Length
(LSB)
Field Description
Page Code Echoes the page code specified in the
LOG SENSE CDB.
Page Length Specifies the total number of bytes contained in this log
page, excluding the 4 bytes that make up the header.
Bit
7 6 5 4 3 2 1 0
Byte
0 — 1
(MSB)
Parameter Code
(LSB)
2 DU DS TSD ETC TMC LBIN LP
3 Parameter Length (1)
4 — n Value of TapeAlert Flag (Flag is set when bit 0 is set to 1; bits 1–7 are reserved)