Reference Guide

Chapter 4 SCSI Commands
LOG SENSE Command (4Dh)
DLT-S4 Interface Reference Guide 93
Table 58 General Purpose
Non-Volatile LOG SENSE Page
— Field Descriptions
Device Status Log Page
(3Eh)
4
This page describes the current status of the drive.
Figure 46 Device Status LOG
SENSE Page — Header
Format
Field Description
Parameter Code Parameter code supported for this page. Always 0.
Parameter
Control Byte
Bit Value Description
DU 1 Disable Update.
DS 0 Disable Save.
TSD 0 Target Save Disable.
ETC 0 Enable Threshold Comparison.
TMC 0 Threshold Met Criteria.
LBIN 0 List Binary.
LP 1 List Parameter.
Parameter Length Specifies the number of bytes in the parameter value. Always set to 40h.
Parameter Value Indicates the actual value of this log parameter.
Bit
Byte
7 6 5 4 3 2 1 0
0 Page Code (3Eh)
1 Reserved
2 — 3
(MSB)
Page Length
(LSB)