Reference Guide

Chapter 4 SCSI Commands
MODE SENSE (6) / (10) Command (1Ah / 5Ah)
DLT-S4 Interface Reference Guide 169
Figure 88 SAS — Disconnect /
Reconnect MODE SENSE
Page — Data Format
EMDP Enable Modify Data Pointers. Always set to 0. The drive does not support
reordering FCP_Data IUs for a single SCSI command.
First Burst Size Always set to 0. Indicates the maximum amount of data that can be transmitted
in the first FCP_Data unit sent from the host. The drive always returns 0 for this
field, indicating no size limit.
Bit
7 6 5 4 3 2 1 0
Byte
0 PS (0) SPF (0) Page Code (02h)
1 Page Length (0Eh)
2 — 3
(MSB)
Reserved
(LSB)
4 — 5
(MSB)
Bus Inactivity Time Limit
(LSB)
6 — 7
(MSB)
Reserved
(LSB)
8 — 9
(MSB)
Maximum Connect Time Limit
(LSB)
10 — 11
(MSB)
Maximum Burst Size
(LSB)
Field Description