Reference Guide

Chapter 4 SCSI Commands
PERSISTENT RESERVE OUT Command (5Fh)
DLT-S4 Interface Reference Guide 227
A PERSISTENT RESERVE OUT command with a Service Action value of
Register and Move uses a parameter list as described in figure 115
and
table 126
. All other service actions of the PERSISTENT RESERVER OUT
command use the parameter list shown in figure 114
and defined in table
125. Every PERSISTENT RESERVE OUT command sends all of the fields of
the parameter list, even if the field is not required for the specific service
action or scope values.
Figure 114 PERSISTENT
RESERVE OUT Parameter List
— Data Format
7h - Fh Reserved Not applicable
Bit
7 6 5 4 3 2 1 0
Byte
0 — 7
(MSB)
Reservation Key
(LSB)
8 — 15
(MSB)
Service Action Reservation Key
(LSB)
16 — 19
(MSB)
Scope-Specific Address
(LSB)
20 Reserved Spec_I_PT All_TG_PT Reserved APTPL
21 Reserved
22 — 23 Obsolete
Code Name Description