Reference Guide

Chapter 4 SCSI Commands
REQUEST SENSE Command (03h)
DLT-S4 Interface Reference Guide 311
NO SENSE
(continued)
00h 5Dh 00h TapeAlert Failure Prediction Threshold Exceeded
5Dh FFh False Exception Condition
RECOVERED
ERROR
01h 00h 17h Clean Requested (Non-Vendor Specific)
0Ah 00h Error Log Overflow
0Ah 80h Error Log Generated
37h 00h Rounded Parameter
3Bh 08h Repositioning Error
44h C1h EEPROM Copy 1 Area Bad
44h C2h EEPROM Copy 2 Area Bad
47h 00h SCSI Parity Error
48h 00h IDE Message Received
51h 00h ERASE Failure
53h 01h Unload Tape Failure
5Bh 01h Threshold Condition Met
5Bh 02h Log Counter at Maximum
5Dh 00h Failure Predictive Threshold Exceeded
5Dh FFh Failure Predictive Threshold Exceeded (False)
NOT READY 02h 04h 00h Unit Not Ready, Cause Nonreportable
04h 01h Unit Not Ready, Calibration in Process
04h 02h Unit Not Ready, LOAD Command Needed. A tape
cartridge is loaded but the tape medium is in an unloaded
state.
04h 03h Unit Not Ready, Manual Intervention Needed. No tape
cartridge is present or a mechanical failure has occurred.
04h 07h Unit Not Ready, Loader Operation in Progress
25h 90h Bad Code Update Image Header
30h 00h Incompatible Medium Installed
30h 02h Incompatible Format
30h 03h Cleaning Cartridge Installed
3Ah 00h Medium Not Present
3Eh 00h Logical Unit Has Not Self-Configured Yet
Text Name
Sense
Key ASC ASCQ Description