Reference Guide

Chapter 4 SCSI Commands
REQUEST SENSE Command (03h)
DLT-S4 Interface Reference Guide 316
UNIT
ATTENTION
(continued)
06h 3Bh 15h Medium Magazine Unlocked
3Fh 01h Microcode has been Changed
3Fh 05h Device Identifier Changed
3Fh 11h Medium Auxiliary Memory Accessible
5Bh 01h Log Threshold Condition Met
DATA
PROTECTED
07h 20h 03h Access Denied, Invalid Management ID Key
20h 05h Access Denied, Incompatible Write Format
20h 80h Access Denied, Password Attempts Exceeded
20h 88h Access Denied, Decryption Not Supported
27h 01h Write Protect, Hardware Write Protect Switch
27h 02h Logical Unit Software Write Protected
27h 80h Unable to Decrypt, Incompatible Hardware
30h 05h Password Invalid, Incompatible Medium
50h 95h DLTWorm Write Append Error
82h 00h Operation Not Allowed Away from BOT
BLANK CHECK 08h 00h 05h EOD Encountered
COMMAND
ABORTED
0Bh 0Eh 01h Information Unit Too Short
1Bh 00h Synchronous Data Transfer Error
24h 3Fh Target Operating Conditions Changed
3Fh 0Fh Echo Buffer Overwritten
43h 00h Message Error
44h 80h Unexpected Selection Interrupt
44h 82h Command Complete Sequence Failure
44h 83h SCSI Chip, Gross Error / Illegal Command Status
44h 84h Unexpected / Unexplained Residue Count in Transfer
Register
44h 87h Disconnect / SDP Sequence Failed
45h 00h Select / Reselect Failure
47h 00h SCSI Parity Error. Check SCSI bus configuration and
connections.
47h 01h Data Phase CRC Error Detected
Text Name
Sense
Key ASC ASCQ Description