User`s guide

SNMP Configuration and Usage Tasks
306 SL500 User’s Guide July 2008 Revision: KA 96116
Set Up Port Control
Use this procedure to set up SNMP port control.
1. Select Tools > System Detail.
2. Select the Library folder from the device tree.
3. Select SNMP > Port Control.
4. Enter the following information:
Port—For SL500 tape library. Port 1B is the public access port; other ports are
unavailable on this library.
Command
Disable—Default. Agent trap requests are sent/received on LAN port:
Enable—SNMP traps are enabled and the agent responds to gets from the clients.
5. Click Apply.