User`s guide

General Library Operation Tasks
316 SL500 User’s Guide • July 2008 Revision: KA • 96116
▼ Open the Front Door (Without Power)
To open the front door when no library power exists:
Note – You must manually move the robotics park lever (beneath the facade and to the
bottom left of the keypad) to the left position so that you can open the door with the
key. Under normal conditions, the lever signifies that the robot is parked inside the
robotics unit at the top of the library, and the door can be safely opened. When no
power exists, the robot is not actually parked, but you will be able to open the door
when you move the lever to the left.
In the following picture, the lever is not in the parked position.
1. Press the power switch on the back of the library to the OFF position.
2. Remove the robotic facade from the top of the library by gently pulling the facade
from side to side to pull the ball studs away from the clips. You might have to use a
screwdriver to gently pry it off.