Operating Guide

www.QuARTzbyACO.com
12
Custom Shower Channels
Two outlets
L1 = ................ inches
L2 = ................ inches
L3 = ................ inches
Three outlets
L1 = ................ inches
L2 = ................ inches
L3 = ................ inches
L4 = ................ inches
3. Number of 2“ outlets
To meet hydraulic requirements of multiple
shower heads the number of outlets can be
increased. Outlet size is fixed at 2“ diameter
due to the width of the unit and availability
of compatible plumbing connections.
L1
L1 L2 L3
L2 L3 L4
Length L = ................ inches Width is fixed at 3.30” (84 mm)
Note: For flange body overall width is 5.67” (144 mm); Overall length is L + 2.36” (60 mm)
3.30“
84 mm
L
1. Length of shower channel
To meet specific room requirements the
channel can be manufactured to specific
length requirements - minimum 12” and
maximum 192”. Standard length grates are
used, this may result in multiple grates per
channel.
For projects requiring a number of units and
standard channels are not appropriate, a
number of features can be customized to
ensure the unit meets required performance
criteria.
Center position
Standard version
End position
L1 = ................ inches
L2 = ................ inches
Custom position
L1 = ................ inches
L2 = ................ inches
2. Position of 2“ outlet
Plumbing layout restrictions may require
a non-central outlet - the position of the
outlet can be manufactured to suit site
requirements.
L/2 L/2
L1 L2
L1 L2
Note: All diagrams show flanged shower
channel body. Custom features are also
available on plain shower channel bodies.