User's Manual PCMCIA Asynchronous Adapter DSP-200/300

Scratch Pad1xAlways EnabledMemory
Mapped
Loopback0048
Scratch Pad8xDTR ControlledAnyClocking0047
Scratch Pad8xDTR ControlledAnyHandshaking0046
Scratch Pad8xRTS ControlledAnyClocking0045
Scratch Pad8xRTS ControlledAnyHandshaking0044
Scratch Pad8xAuto ToggleAnyClocking0043
Scratch Pad8xAuto ToggleAnyHandshaking0042
Scratch PadNormalDTR ControlledAnyClocking0041
Scratch PadNormalDTR ControlledAnyHandshaking0040
Scratch PadNormalRTS ControlledAnyClocking0039
Scratch PadNormalRTS ControlledAnyHandshaking0038
Scratch PadNormalAuto ToggleAnyClocking0037
Scratch PadNormalAuto ToggleAnyHandshaking0036
Scratch Pad8xAlways EnabledAnyClocking0035
Scratch Pad8xAlways EnabledAnyHandshaking0034
Scratch Pad8xDTR ControlledAnyLoopback0033
Scratch Pad8xRTS ControlledAnyLoopback0032
Scratch Pad8xAuto ToggleAnyLoopback0031
Scratch PadNormalAlways EnabledAnyClocking0030
Scratch PadNormalAlways EnabledAnyHandshaking0029
Scratch PadNormalDTR ControlledAnyLoopback0028
Scratch PadNormalRTS ControlledAnyLoopback0027
Scratch PadNormalAuto ToggleAnyLoopback0026
Scratch Pad8xAlways EnabledAnyLoopback0025
Scratch PadNormalAlways EnabledAnyLoopback0024
ISR8xDTR ControlledAnyClocking0023
ISR8xDTR ControlledAnyHandshaking0022
ISR8xRTS ControlledAnyClocking0021
ISR8xRTS ControlledAnyHandshaking0020
** Handshaking indicates RTS routed to AUXOUT, AUXIN routed to CTS, and TCLK routed to RCLK.
Loopback indicates RTS routed to CTS, AUXIN routed to AUXOUT, and TCLK routed to RCLK.
Clocking indicates RTS routed to CTS, AUXIN routed to RCLK, and TCLK routed to AUXOUT.
*** Any indicates variable value; this value may or may not be user selectable depending on platform.
7. Select a Basic Configuration that displays "No conflicts" in the bottom display
region titled Conflicting Device List from the drop down list.
8. Windows 2000 should have chosen an available Interrupt Request setting
automatically when the I/O address range was configured by a Basic Configuration
selection. This default Interrupt Request setting should not need changed as long
as "No conflicts" is displayed in the bottom display region titled Conflicting Device
List. If you are satisfied with Windows 2000 selection then skip the next step.
4-13 DSP-200/300
(Rev. I and later) User's Manual