QSP-200/300 User's Manual

Viewing the QSP-200/300 Resource Settings
The following steps detail how to view the resource settings that Windows 95/98/ME/2000 has
allocated for the QSP-200/300.
2.1.4 Window 95/98/ME
1. Double click on the My Computer icon located on the Windows 95/98 desktop. This
opens a folder showing various drives, Control Panel, etc.
2. Double click on the Control Panel icon. This opens another folder with many
different system utilities.
3. Double click on the System icon. This opens the "System Properties" window.
4. Click on the "Device Manager" tab. Double click on the item "Ports (Com &
LPT)" located within the list of hardware.
5. Double click on any of the items labeled "Quatech Multi- port(COM x)" where x
represents the logical COM port number. The items labeled "Quatech Multi-port"
are the child devices of the QSP-200/300 parent device. Click the "Resources" tab
at the top of the "System Properties" box.
6. The base I/O address and IRQ level displayed here is the base I/O address and IRQ
level of the entire parent device. The resources cannot be modified here. For
information on how to change these settings, got to the section labeled "Changing
Configuration of the QSP-200/300".
7. Use the Logical Com Port name to access any of the particular serial ports on the
QSP-200/300. This name is required by a Windows 95/98 application when
accessing a particular port.
2.1.5 Windows 2000
1. Double click on the My Computer icon located on the Windows 2000 desktop. This
opens a folder showing various drives, Control Panel, etc.
2. Double click on the Control Panel icon. This opens another folder with many
different system utilities.
3. Double click on the System icon. This opens the "System Properties" window.
4. Click on the "Hardware" tab. Click on the ‘Device Manager’. Double click on the
item "Ports (Com & LPT)" located within the list of hardware.
5. Double click on any of the items labeled "Quatech PCMCIA Serial Port(COM x)"
where x represents the logical COM port number. The items labeled "Quatech
PCMCIA Serial Port" are the child devices of the QSP-200/300 parent device.
Right click on the chosen child device and choose "Properties".
6. The base I/O address and IRQ level displayed here is the base I/O address and IRQ
level of the entire parent device. The resources cannot be modified here. For
QSP-200/300 User's Manual 8