Asynchronous Communications Adapter User's Manual RS-232

4.4 Options Register
The Options Register allows software to identify the ESC(LP)-100
as a Quatech Enhanced Serial Adapter. It also allows software to set the
UART clock rate multiplier. Figure 5 shows the structure of the Options
Register.
The powerup default of the Options Register is all bits zero.
Clock rate multiplier bit 0RR00
Clock rate multiplier bit 1RR11
(reserved, 0)-2
(reserved, 0)-3
(reserved, 0)-4
(reserved, 0)-5
ID bit 0ID06
ID bit 1ID17 (MSB)
DescriptionNameBit
Figure 5--- Options Register bit definitions
4.4.1 Enhanced Serial Adapter Identification
The ID bits are used to identify the ESC(LP)-100 as a Quatech
Enhanced Serial Adapter. Logic operations are performed such that the
values read back from these bits will not necessarily be the values that
were written to them. Bit ID1 will return the logical-AND of the values
written to ID[1:0], while bit ID0 will return their exclusive-OR.
Software can thus identify a Quatech Enhanced Serial Adapter by
writing the ID bits with the patterns shown in the "write" column of
Figure 6, then reading the bits and comparing the result with the patterns
in the "read" column. Matching read patterns verify the presence of the
Options Register.
0111
1001
1010
0000
ID0ID1ID0ID1
ReadWrite
Figure 6 --- ID bit write/read table
ESC(LP)-100 User's Manual 6