User`s manual

The QTPCI program is capable only of displaying the PCI configuration. It cannot
be used to make changes.
Q - Quatech PCI adapters
N - Other PCI devices
X - EXIT
M - Change to Expert Mode
Quatech PCI Configuration Information Display Software
Version 1.03
INSTRUCTIONS:
------------------------
Press keys listed in the menu at the bottom of the screen.
This program only displays information. It cannot make changes.
PCI BIOS detected, version 2.10
Quatech PCI adapters detected
---------------------------------------------
MPAC-100 Single Port Synch RS-232 Serial Adapter (Hardware Revision A1)
Uses IRQ 12
Base addr 1 = 0xD800 I/O
_
Numbers preceeded by "0x" are hexadecimal.
Figure 14 --- QTPCI.EXE Basic Mode display
Figure 14 shows the Expert Mode display for the MPAC-100 after the "Q" key
has been pressed. The information from the Basic Mode display is presented along
with more details such as the Vendor and Device IDs, PCI Class Code, size of memory
Quatech MPAC-100 User's Manual
16