User`s manual

and I/O regions, etc. Pressing the "N" key will show similar information for all

non-Quatech PCI devices in the system, including those devices integrated on the

motherboard. In this example, the "Base addr 0" resource is reserved.

For users interested in even more details, PCI BIOS information can be

displayed by pressing the "B" key. Pressing the "I" key displays the PCI interrupt

routing table.

Q - Quatech PCI adapters

N - Other PCI devices

X - EXIT

M - Change to Basic Mode

Quatech PCI Configuration Information Display Software

Version 1.00

B - PCI BIOS details

I - Interrupt routing details

Quatech PCI adapters detected

---------------------------------------------

Vendor ID 0x135c, Device id 0x00F0 found in slot 0x04 on bus 0x00

Device/function code = 0x48, Revision ID = 0x01 (Hardware revision A1)

PCI Class Code = 0xff0000

Subsystem Vendor ID 0x135c, Subsystem Id 0x00F0

INTA# mapped to IRQ 12 (route 0x04)

Base addr 0 = 0xe000 I/O 0X80 bytes allocated

Base addr 1 = 0xd800 I/O 0X10 bytes allocated

MPAC-100 Single Port Synch RS-232 Serial Adapter

Figure 15 --- QTPCI.EXE Expert Mode display

Quatech MPAC-100 User's Manual