Instructions

_______________________________________________________________________________

https://quio-rfid.de/

1. Double click on“ ”，enter QR code Reader parameter setting page,

2.Use mini USB data cable connect the QR code reader to PC, fill-in light on, buzzer rings, QR

code reader start done, then use the internet cable connect the QR code Reader to PC.

3.QR code Reader default fixed IP is 192.168.1.99, client PC manual setting the same network

segment with the QR code Reader, follow the operation as below Picture, can get the QR code

reader parameter via the software

PAGE 1
https://quio-rfid.de/ _______________________________________________________________________________ 1. Double click on“ ”，enter QR code Reader parameter setting page, 2.Use mini USB data cable connect the QR code reader to PC, fill-in light on, buzzer rings, QR code reader start done, then use the internet cable connect the QR code Reader to PC. 3.QR code Reader default fixed IP is 192.168.1.
PAGE 2
https://quio-rfid.de/ _______________________________________________________________________________ 4.Function parameter specification: 1.network parameter Mainly include network parameter of the QR code Reader, configure relevant parameter, click setting can done setting. Internet mode: default fixed IP:192.168.1.
PAGE 3
https://quio-rfid.de/ _______________________________________________________________________________ 2.
PAGE 4
https://quio-rfid.de/ _______________________________________________________________________________ 【horn】not enabled；【scan fill-in light】 turn on and off for camera fill-in light； 4.bar code, QR code setting setting QR code prefix and suffix, add the correspond prefix and suffix to QR code 【prefix and suffix input format】ASCII、HEX option，setting the prefix and suffix format output； 5.
PAGE 5
https://quio-rfid.