Installation Guide

ManualsBrandsQuoizel ManualsChandeliersBDR2820IB

Quoizel,Inc.

6CorporateParkway

GooseCreek,SC

29445

CustomerService

Phone631.273.2700

Fax631.231.7102

www.quoizel.com

WarningsandCautions

Turnoffelectricityatcircuitbreakerormainfuseboxbeforeinstallation.Consultalicensedelectricianifindoubt.

Theseinstructionsareprovidedforyoursafety.Itisveryimportantyoureadthemcompletelybeforeinstalling

thefixture.Westronglyrecommendthatalicensed,professionalelectricianperformtheinstallation.

Disconnectfixturefrompowersourcebeforereplacingbulbs.Makesurebulbsaregivensufficienttimetocool

beforeremoval.Donotsubjectglasspartstoanyshockwhileinoperationorshatteringmayresult.

ThankyouforpurchasingaQuoizelproduct.

Needassistancewithpartsorassembly?CallQuoizelcustomerserviceat1-631-273-2700

orvisituson-lineatwww.quoizel.com

AssemblyInstructionSheet#IS-BDR2820IB

ForStyleBDR2820IB

1of6

ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wire

strippers,electricaltape,safetyglasses.

EstimatedAssemblyTime:20-30minutes

Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage

contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing

ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer

serviceforreplacementparts.

6CORPORATEPARKWAY

GOOSECREEKSC29445

wwwquoizelcom

2014QuoizelInc.

BulbRecommended:(3)CandelabraBase60WMaximum

Part Description

Quantity

A Crossbar

Nipple

1pc.

2pcs.

1pc.

HexNut

PackageContents

CanopyChainLoop

LockWasher

1pc.

CanopyLockRing

1pc.

FixtureChain

CeilingCanopy

SideArm

FixtureLoopAssembly

3pcs.

January2014

CenterStem 1pc.

FixtureBody 1pc.

Shade 1pc.

Summary of content (6 pages)

PAGE 1
Assembly Instruction Sheet #IS-BDR2820IB For Style BDR2820IB 6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Quoizel, Inc. 6 Corporate Parkway Goose Creek, SC 29445 Customer Service Phone 631.273.2700 Fax 631.231.7102 www.quoizel.com Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
PAGE 2
BDR2820IB FINISH: IMPERIAL BRONZE 5” Dia. 1" Overall Height 81” (Includes 48” Chain) 1 NOTE: TWO LIGHTS SHOWN FOR ILLUSTRATION PURPOSES ONLY. 30.5” 6” 2 20” Dia. (3) 60W Candelabra Base Bulbs (No Supplied) NO. PART NUMBER NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2" REPLACEMENT PART DESCRIPTION REQ. 1 M682CHIB CHAIN IMPERIAL BRONZE 3.
PAGE 3
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-BDR2820IB For Style BDR2820IB Figure 1 STEP 1 - Attach Fixture Loop Assembly, Center Stem to Fixture Body Fixture Loop Assembly A. Thread Fixture Loop Assembly (I), Center Stem (K) and Fixture Body (L) together. Hand tighten until snug. Center Stem Fixture Body Fixture Loop Assembly STEP 2 - Attach Fixture Loop Assembly to Fixture Figure 2 Hook Loop A.
PAGE 4
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-BDR2820IB For Style BDR2820IB STEP 4 - Attach Nipple to Crossbar A. Thread one Hex Nut (D) onto the top end of the Nipple (B). B. Place one Lock Washer (C) over the top end of the Nipple (B) and then thread the Nipple (B) into the center lock hole of the Crossbar (A). C. Using pliers, thread the hex Nut (D) against the Crossbar (A) and hand tighten until snug.
PAGE 5
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-BDR2820IB For Style BDR2820IB STEP 7 - Attach Fixture Chain to Canopy Chain Loop and Fixture Loop A. Adjust the Fixture Chain (H) to your desired length by removing the links if needed. You may need to use plier to open the chain links. If so, put a cloth over the chain to protect the finish from the pliers. B.
PAGE 6
CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-BDR2820IB For Style BDR2820IB STEP 9 - Make Wire Connections A. Un-thread the Canopy Lock Ring (G) and slide Canopy Lock Ring (G) and Ceiling Canopy (E) down the Fixture Chain (H). B. Push all slack fixture wire through Canopy Chain Loop (F) into Outlet Box. Trim excess fixture wire leaving a minimum of 6 inch. Hanging out of the Outlet Box. C. Use standard wire connectors to make all wire connections.