Installation Sheet

1of2
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Assembly Instruction Sheet #IS-CPL5204BN
For Style CPL5204BN
Package Contents
A
Crossbar Assembly
x1
B
6” Rod
x2
C
12” Rod
x2
D
Ceiling
Canopy
x1
Thank youfor purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
2017 QuoizelInc.
ReleasedDate:2017-09-19
Cage
x1
Pleasegoto forproductcleaningtips.Gotothe selection.
(4)B10CandelabraBaseBulbs60WMaximum
30-45minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
www.quoizel.com Care+Maintenance
LightSource:
EstimatedAssemblyTime:
Preparation:
ToolsRequired: Flathead screwdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
STEP 3 Install Crossbar Assembly-
.
A. Pass the supply wires through the Crossbar Assembly (A). Attach
the Crossbar Assembly (A) to the Outlet Box with the head of the
Green Ground Screw facing you. Secure it with Outlet Box Screws
(not included). Tighten until snug
Figure 2
Figure 3
G
Candle
Cover
x4
Supply Wires with
Ground Wire
Outlet Box Screws
(not included)
Outlet Box
A
F
Center
Stem
x1
H
Socket
Assembly
x1
E
STEP 1 - Install Socket
Assembly, Center Stem and
Cage together
A. Thread the Cage (E), the
Center Stem (F) and the
Socket Assembly (H) together
as shown. Hand tighten until
snug.
E
F
H
Figure 1
STEP 2 - Install Ceiling Canopy,
Rods and Fixture Body together
A. Determine the Rods (B/C) to be
assembled to the Cage (E)
according to your hanging
height.
B. Pass the supply wires and
ground wire through the chosen
rods (B/C) and the Ceiling
Canopy (D). Thread the Cage
B
B
D
Supply Wires
and Ground Wire
C
C
(E), the chosen
Rods (B/C) and the
Ceiling Canopy (D)
together. Hand
tighten until snug.
Suggested rods for
Ceiling height :
8’ ceiling : use (1) 6”
rod
9’ ceiling : use (1) 6”
rod and (1) 12” rod
10’ ceiling : use (1)
6” rod and (2) 12”
rods
E