Installation Sheet

2of2

2018 QuoizelInc.

ReleasedDate:2018-03-02

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184

or visit us on-line at www.quoizel.com

STEP 4 Install the Fixture-

A. Carefully tuck all wires into the outlet box and position the ceiling

canopy and Fixture Body (B) over the outlet box. Align the holes in

the ceiling canopy with the mounting screws, then attach the ceiling

canopy and Fixture Body (B) using the previously removed

mounting balls. Hand tighten until snug.

GFC1617PN

FINISH: PALLADIAN BRONZE

NOTE: ALL DIMENSIONS ARE ROUNDED UP

TO THE NEAREST 1/4"

5.75” Dia.

14” Dia.

16.5” Dia.

7.75”

4”

Figure 4

Mounting Screw

Mounting Ball

STEP 5 - Install Shade and Cap

A. Thread the hex nut end of the Nipple with Hex Nut (C) into the hex

coupling on the bottom center of the Fixture Body (B). By using

pliers, thread the hex nut against the hex coupling and hand tighten

until snug.

B. Insert bulbs onto sockets and screw snugly into place.

C. Place Spacer Tube (D), Check Ring (E), Big Flat Washer (F), Big

Rubber Washer (G), Shade (H), Small Rubber Washer (I) and Small

Flat Washer (J) over the end of the Nipple (C) as shown. Secure

them together with the Hex Nut (K). Hand tighten until snug.

C. Place the Cap (L) over the end of the Nipple (C) and secure with the

Finial (M). Hand tighten until snug.

Your fixture is now assembled and ready to use. Enjoy!

Figure 5

Vintage Bulb

(recommended

but not includes)

Socket