Installation Guide

ManualsBrandsQuoizel ManualsChandeliersLP5009IB

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

www quoizel com

Quoizel, Inc.

6 Corporate Parkway

Goose Creek, SC

29445

Customer Service

Phone 631.273.2700

Fax 631.231.7102

www.quoizel.com

ToolsRequired:Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wire

strippers,electricaltape,safetyglasses.

EstimatedAssemblyTime:35-40 minutes

Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage

contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing

ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer

serviceforreplacementparts.

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing

the fixture. We strongly recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool

before removal. Do not subject glass parts to any shock while in operation or shattering may result.

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

2011 QuoizelInc.

1of8

August2011

Assembly Instruction Sheet #IS-LP5009

For Style LP5009IB

BulbRecommended: (9)MediumBase100WMaximum

Summary of content (8 pages)

PAGE 1
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Quoizel, Inc. 6 Corporate Parkway Goose Creek, SC 29445 Customer Service Phone 631.273.2700 Fax 631.231.7102 www.quoizel.com Assembly Instruction Sheet #IS-LP5009 For Style LP5009IB Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
PAGE 2
LP5009IB 9” Dia. FINISH: IMPERIAL BRONZE 2.5” 2 4 NOTE: FOUR LIGHTS SHOWN FOR ILLUSTRATION PURPOSES ONLY. 135” OVERALL HEIGHT ( INCLUDES 96” CHAIN ) 3 6 37” 5 1 30” Dia. (9)Medium Base Bulbs (Not Supplied) NO. PART NUMBER 1 15009IBL 2 M2050CHIB 3 NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2" REPLACEMENT PART DESCRIPTION REQ. BASE IMPR BRNZ 9L CHANDELIER 0 CHAIN/QUICK LINK IMPR BRNZ 1 G1615SH GLASS CANDELLA SCAVO 6.5X3.
PAGE 3
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-LP5009 For Style LP5009IB Package Contents A G Part Description Quantity A Crossbar 1 pc. B Mounting Screw 2 pcs. C Nipple 1 pc. D Lock Washer 2 pcs. E Hex Nut 2 pcs. F Ceiling Canopy 1 pc. G Canopy Chain Loop 1 pc. H Canopy Lock Ring 1 pc. I Quick Link 2 pcs. J Fixture Chain 1 pc. K Tuck Washer 1 pc. L Fixture Canopy Assembly 1 pc. M Socket Collar 9 pcs.
PAGE 4
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-LP5009 For Style LP5009IB STEP 1 - Assemble Fixture Canopy Assembly, Support Parts and Socket Assemblies A. Attach chain ends of Support Parts A (Q) to the Hook on the side of the Fixture Canopy Assembly ((L). Attach ends of the Support Parts A (A) to the Hooks on the top edge of the Upper Socket Assembly (O). B.
PAGE 5
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-LP5009 For Style LP5009IB Structural or Bridging Member STEP 3 - Attach Crossbar to Outlet Box A. Drill a 5/8” diameter clearance hole on the top inside center of the Outlet Box and through the Structural Support Member. B. Place Crossbar (A) onto the Outlet Box and line up Mounting Holes with a set of holes on Crossbar (A). C.
PAGE 6
CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-LP5009 For Style LP5009IB STEP 5 - Assemble Ceiling Canopy A. Push the Ceiling Canopy ( F ) upward over the Outlet Box. Thread the Canopy Lock Ring ( H ) onto the Canopy Chain Loop ( G ) and tighten until snug to secure the Ceiling Canopy ( F ). Outlet Box Ceiling Line Canopy Chian Loop Ceiling Canopy Canopy Lock Ring Figure 5 STEP 6 - Attach Fixture Chain to Canopy Chain Loop and Fixture Loop A.
PAGE 7
Assembly Instruction Sheet #IS-LP5009 For Style LP5009IB 6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com STEP 7 - Pass Supply Wires through Fixture Chain A. Pull the Supply Wires, Ground Wire and Safety Cable up through the Fixture Chain (J) alternating links. Push the wires and Safety Cable up through the Canopy Chain Loop (G) into the outlet box. Canopy Chain Loop Safety Cable Fixture Chain Supply Wire and Ground Wire Figure 7 Safety Cable STEP 8 - Install Safety Cable A.
PAGE 8
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-LP5009 For Style LP5009IB STEP 9 - Make Wire Connections A. Push all slack fixture wire through Canopy Chain Loop (E) into Outlet Box. Trim excess fixture wire leaving a minimum of 6 inch. Hanging out of the Outlet Box. B. Use standard wire connectors to make all wire connections. (Connectors are not included with fixture.) Strip and prepare wire ends according to instructions supplied with connectors. C.