Instructions / Assembly

2 of 6
visit us on-line at www.quoizel.com
STEP 1
Use wood screws
When securing to support
structure with approved
electrical outlet box. Drill
9/64” pilot holes.
Use machine screws
when securing to existing
ceiling fan-rated outlet box.
that supports of 50 lbs
(22.72 kg) or less.
For angled ceilings, point opening toward peak.
This fan cannot be used for the ceiling which
angle is greater than 10 degree.
STEP 2
skip to next page
Standard
Downrod
for ceilings 11”
high
Longer
Downrod
for angled ceilings
or ceilings 12’ or
higher
Included
(Pre-assembled)
Included
1 2 3
4
567
Steps 1-3 to remove standard downrod pipe
Steps 4-7 to reassemble with new pipe
OPTION 1 OPTION 2
Ceiling Bracket Downrod Install Cable Wiring
Canopy&
Fan Blade
Table of
Contents
STEP 1 STEP 2-4 STEP 5 STEP 6 STEP 8
2020 Quoizel Inc.