Installation Guide

ISSUED 07-2012

PACKAGE CONTENTS

PART

DESCRIPTION

QUANTITY

AFish

1pc

T7 Bulb

Socket with Cord

1OF3

● These instructions are provided for your safety. It is very important that they are read completely before the

installation of your fixture. We strongly recommend that a professional electrician install the fixture.

● Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had sufficient

time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.

CAUTIONS

STYLE NUMBER: TFX1520T

INSTRUCTION SHEET IS-TFX1520T

● Before beginning installation of product, make sure all parts are present. Compare parts with package contents

list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the

product. Contact customer service for replacement part.

● Estimated Assembly Time : 5 10 minutes

● Tools Required for Assembly (included) : (1) 15W T7 Cand Base Bulb.

PREPARATION

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

www quoizel com

PAGE 1
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com INSTRUCTION SHEET IS-TFX1520T STYLE NUMBER: TFX1520T PACKAGE CONTENTS DESCRIPTION PART ISSUED 07-2012 QUANTITY A Fish 1 pc B T7 Bulb 1 pc C Socket with Cord 1 pc B A C CAUTIONS ● These instructions are provided for your safety. It is very important that they are read completely before the installation of your fixture. We strongly recommend that a professional electrician install the fixture.
PAGE 2
TFX1520T 6” 8” (1) 15W Candelabra Base T7 Bulb (Supplied) NO. PART NUMBER NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2" REPLACEMENT PART DESCRIPTION 1 2 OF 3 REQ.
PAGE 3
INSTALLATION INSTRUCTIONS STYLE NUMBER: TFX1520T STEP 1: a. This fixture uses T 7 Bulb (Supplied) with candelabra base . Maximum 15 watts. b. Insert bulb and screw properly into place. T7 Bulb Socket STEP 2: a. Place the Socket with Bulb into the Center Hole on the bottom of the Fish. The Spring Tabs on the Socket will engage the Fish. Fish Your fixture is now assembled and ready to use.