Installation Sheet

1of2
Assembly Instruction Sheet #IS-VRG1608BN
For Style VRG1608BN
Package Contents
STEP 1 Install Mounting Plate-
A. the Mounting Plate g
g s Connect ground wire from
Mounting Plate (A) to bare or green ground wire from outlet box with
one wire connectors. the
ob
with screwdrivers
Attach (A) to outlet box with the head of reen
round crew against outlet box.
Wrap connection with approved electrical
tape.
B. Pass supply wires through the Mounting Plate (A). Attach the
Mounting Plate (A) to utlet ox and secure it with outlet box screws
(not included). Tighten until snug .
Figure 1
Pleasegoto forproductcleaningtips.Gotothe selection.
Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.
IntegratedLED15W
:LutronAYCL-153Por Lutron DVCL-153P.
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
www.quoizel.com Care+Maintenance
ToolsRequired:
LightSource:
CompatibleDimmerSwitches
EstimatedAssembly Time:
Preparation:
STEP 3 Install Fixture Body-
A. Carefully tuck all wires into the outlet box and push mounting clips
on Fixture Body (B) into Mounting Plate (A).
Your fixture is now assembled and ready to use. Enjoy!
2017 QuoizelInc.
ReleasedDate:2017-12-20
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer serviceat 1-800-645-3184
or visit us on-line at www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
A
Mounting Plate
x1
B
Fixture Body
x1
Outlet Box Screws
(not supplied)
A
Outlet Box
Green Ground
Screw
Supply Wires and
Ground Wire
B
A
Mounting Clip
Outlet Box
Figure 3
STEP 2 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Figure 2
Bare, or Green
Ground wire
from outlet box
Ground wire from
Mounting Plate
Wire Connector
HOW TO REMOVE FIXTURE BODY AFTER INSTALLATION
If you want to remove the Fixture Body (B) from the ceiling after
assembly, use the Flathead Screwdriver to lever the Fixture Body (B)
and carefully remove it with hands.
B
Flathead Screwdriver
CEILING
Outlet Box