Installation Sheet

ManualsBrandsQuorum International ManualsCeiling FansWindmill 60" 15 Blade Indoor / Outdoor Ceiling Fan with Wall Control

Model #96015-xx: 37.5 lbs

97215-xx: 44.6 lbs

Unpack your fan and check the contents. Do not discard the carton. If warranty

replacement or repair is ever necessary the fan should be returned in original packaging.

Remove all parts and hardware. Do not lay motor housing on its side - because the

decorative casing may shift. Check all visible screws, bolts and nuts for tightness.

Examine all parts. The following parts should be included:

CAUTION: DO NOT LIFT MOTOR ASSEMBLY BY THE OUTER RING.

LIFTING BY THE OUTER RING PORTION WILL LIKELY CAUSE DAMAGE.

2. UNPACKING YOUR FAN

1. Set of blades (15 pcs) (a)

2. Blade deco plates (15 pcs) (b)

3. Blade deco bars (15 pcs) (c)

4. Blade arms (5 pcs) (d)

5. Hanging bracket (e)

6. Canopy (f)

7. Canopy cover (g)

8. Downrod assembly (6") (h)

9. Yoke cover (i)

10. Fan motor assembly (j)

11. Control cup plate (k)

12. Control cup (l)

13. Wall transmitter incl. 2 mounting screws and 3 wire nuts (m)

14. 2 wall plates (white and almond), 1 face plate (almond), 2 sets

of mounting screws, and machine screws (n)

15. Battery (o)

16. Parts bags (p) containing:

Blade attachment hardwares (5 pcs)

Screw No. 1: Blade deco plate screws (5/32”x22mm) (31 pcs)

Screw No. 2: Blade deco bar screws (5/32”x8mm) (31 pcs)

Screw No. 3: Blade secure screws with fiber washers

(3/16"x7.5mm) (31 pcs)

Screw No. 4: Blade arm screws with lock washers

(1/4"x38mm) (6 pcs)

Screw No. 5: Blade arm screws with lock washers

(3/16"x15mm) (11 pcs)

Mounting hardware (3 wire nuts)

NOTE:

Some Quorum fan models will have slightly

different parts than what is shown here

depending upon the design you have chosen.

Basic installation procedures are similar for

all models.

IF YOU FIND THAT PARTS ARE MISSING. CONTACT YOUR DEALER FOR REPLACEMENT, OR CALL QUORUM DIRECTLY AND WE WILL MAIL REPLACEMENTS TO YOU IMMEDIATELY.

1. To avoid possible electric shock, turn

off the electricity at the main fuse box or

circuit panel before you begin the fan

installation or before servicing the fan or

installing accessories.

2. Read all instructions and safety

information carefully before installing

your fan and save these instructions.

3. Make sure all electrical connections

comply with local codes or ordinances as

well as the National Electrical Code. If

you are unfamiliar with electric wiring,

please use a qualified and licensed

electrician.

4. Make sure you have a location

selected for your fan which allows clear

space for the blades to rotate, and at lease

seven (7) feet of clearance between the

floor and the fan blade tips.

5. To reduce the risk of fire, electric

shock, or other personal injury, mount fan

only on an outlet box or supporting system

marked acceptable for fan support of 50

lbs (22.7 kg) or less and use mounting

screws provided with the outlet box. Most

outlet boxes commonly used for the support

of lighting fixtures are not acceptable for

fan support and may need to be replaced.

Consult a qualified electrician if in doubt.

6. To reduce the risk of personal injury

use only approved hanging brackets and

screws supplied with the outlet box for

mounting to the outlet box.

7. After installation is complete, check

that all connections are absolutely secure.

8. Do not insert anything into the fan

blades while they are rotating.

9. To operate the reverse function on the

fan, press the reverse button on the wall

transmitter while the fan is running.

10. Do not attempt to control the

operation of the fan (or an optional light

kit) from any wall control that is not

approved by Quorum for use with its fans.

Do not use solid state wall controls. The

use of any unapproved control voids the

fan's warranty.

1. SAFETY RULES

TOOLS REQUIRED

FOR INSTALLAITON

Phillips Screwdriver

Wire Cutters

Electrical Tape

Step Ladder