User's Manual

19
Quick Guide
Operation
1HWZRUN6HWXS
•
Cascade Code [Mandatory]: Type in the pre-assigned code. Otherwise,
you cannot access system setup.
•
/RFDWLRQ,QIRUPDWLRQ: Enter the latitude and longitude of a location,
otherwise you cannot access the system setup. You can input either Decimal
Degrees or Degrees-Minutes-Seconds.
[Example.]
(‘N/S ‘ | ‘E/W ‘) ddd.dddddd: (Latitude: N 39.006957 Longitude: W
94.532306)
•
+HDUWEHDW,QWHUYDO: Sets the time to transmit the Heartbeat to NMC Server.
(Default value is 20 minutes. At the setup, temporarily reduce the value to 1
minute. After conforming heartbeat report, set the value back to 20 minutes.)
•
3URGXFW,QIRUPDWLRQ: This is for manufacturer used only. DO NOT change
this value.
•
6WDWLF,3IRU5HPRWH&RQWURO: Connect to the External Monitoring Device for
Remote Access. Do not enter any value unless a static IP is assigned. DHCP
client.
•
10&6HUYHU,3: Do not change this value; otherwise, the Heartbeat
transmission or Remote Access may not work.