User's Manual

Quick Guide

Introduction

NOTCHCELL repeater can be used in CDMA service shaded areas like

in-buildings, underground and tunnels to cover its service area. This repeater

system designed for dual and simultaneous service, namely, it receives signals from

the base station through donor antenna, amplifies the signals and

re-transmits it to one or other mobile stations.

- NOTCHCELL utilizes the web-based user interface and web server to support

the remote access. There are two physical LAN ports:

• The Local port provides the wireless on-site access to the repeater.

The two ports allow local and remote users to access the repeater

simultaneously.

- DHCP server at the Local port enables Plug and Play by automatically assigning

the IP address to the user’s computer.

- Parameter setup is only one click away –

• Automatic Easy Setup feature will measure the isolation and limit the maximum

gain accordingly. This will also enable Auto Level Control as well as Auto

Shut Down. These two features are strongly recommended to prevent the

uncontrolled power output, which could have an adverse impact on the

RF network and the repeater. For example, ALC will automatically apply

attenuation when the input signal strength is increased due to the new base

station deployment near the repeater site.

• R-tron implemented intelligent design in the NOTCHCELL as following:

Ƈ

Programmable Bandwidth and Band

5, 10, 15, and 20 MHz contiguous and non-contiguous segments

Any Band Combination within 65MHz PCS Band [A,D,B,E,F,C,G]

» Three (3) 5MHz segments

Ƈ

Remote Access and Control

Ƈ

Built in CDMA MODEM

Ƈ(DV\DQG4XLFN,QVWDOODWLRQ

ª:HEEDVHG*8,

» Plug and Play - DHCP Server @ Local Port

Automatic Easy Setup (Recommended)

,VRODWLRQ'HWHFWLRQ

WiFi Access on site

Ƈ

Auto Level Control & Auto Shut Down

NOTCH antenna (Sold separately)

A NOTCH antenna has great front-back ratio and ensures the better isolation

between the Donor Antenna and Server Antenna.

It is optimized for the NOTCHCELL models.

It is recommended to use the NOTCH antenna when installing the NOTCHCELL

models.