User's Manual

29
Quick Guide
Operation
Turn off '/$PSOLILHU and 8/$PSOLILHU.
Alarms
< Alarm Status > < Alarm Range >
• Reported to Sprint : If an alarm occurs, the repeater will report directly to
Sprint as a SNMP Trap so the LED of ALARM on the repeater does not blink.
•
On Site Alarm : If an alarm occurs, the alarm LED on the repeater will turn
on. Please refer to the troubleshooting section of this manual.
• No change of the values in the alarm range is recommended.
Click Update in the left menu.
5.5.1 Update: System Firmware
Click Browse.
Step 3B
4.5 Update
Step 1