User`s guide

ADDITIONAL UPS FEATURES

Eaton 5125 Rack-Mount UPS (5000/6000 VA) User's Guide S 164201541 Rev D

www.eaton.com/powerquality

X-Slot Cards

X-Slot cards allow the UPS to communicate in a variety of networking

environments and with different types of devices.

NOTE If your UPS part number ends with -5507, your UPS includes the factory-installed

ConnectUPS -X Web/SNMP Card; continue to the following section, “The ConnectUPS-X

Web/SNMP Card.”

The Eaton 5125 has an available communication bay for one of the

following X-Slot cards:

S ConnectUPS-X Web/SNMP Card - has SNMP and HTTP capabilities as

well as monitoring through a Web browser interface; connects to a

twisted-pair Ethernet (10/100BaseT) network. It has a built-in

switching hub that allows three additional network devices to be

connected to the network without the requirement of additional

network drops. In addition, a Environmental Monitoring Probe can be

attached to obtain humidity, temperature, smoke alarm, and security

information.

S Relay Interface Card - has isolated dry contact (Form-C) relay outputs

for UPS status: Utility failure, Low battery, UPS alarm/OK, or On

bypass.

S Modbus

Card - allows you to continuously and reliably monitor the

UPSs in your Building Management System (BMS).

S Multi-Server Card - has six serial communication ports that can

communicate simultaneously with other computers using LanSafe

Power Management Software (provided on the Software Suite CD).

S USB Card - connects to a USB port on your computer.