User's Manual

Chapter 1 Introduction FCD-IPM Installation and Operation Manual
1-4 Overview
Features
E1/T1 Main Link
• E1/T1 Integrated Access Device (IAD) for Internet/Intranet and voice connectivity
• E1 over 2-wire SHDSL link optional
• Integral E1 with or without LTU or Integral T1 CSU/DSU
• Optional sub-E1/T1 drop and insert port for PABX connectivity
• Fail-safe bypass for the sub-E1/T1 link
• Optional fiber optic uplink.
Integrated Router
• IP and IPX routing and standard bridging
• Supports Frame Relay, PPP and MLPPP
• One or two Ethernet ports or one Fast Ethernet port
• Optional dial-up or integrated ISDN backup
• PAP/CHAP authentication
• Solid Firewall protection
• NAT and Single IP address translation
• DHCP server and relay
• OSPF Protocol
• Quick setup and configuration
• In-band and out-of-band remote management
• SNMP and Telnet support
• Dual management authorization levels (carrier/user)
• FLASH memory for software and parameter file downloading
• Remote software and parameter file download.
Ethernet/Fast Ethernet Switch
• Built-in 4-port switch with 1Mb buffer with Auto-polarity and auto-negotiation.
Data
• Optional second data port (transparent n x 64/56 or serial router port).
Voice
• Supports twelve analog voice channels
• PCM encoded, A-Law or µ-Law
• Optional interfaces: 2-wire FXS, 2-wire FXO, or 4-wire or 2-wire E&M.