User's Manual
Table Of Contents
- Front Matter
- Quick Start Guide
- Contents
- Chapter 1 Introduction
- Chapter 2 Installation and Setup
- Chapter 3 Operation
- Chapter 4 Configuration
- Chapter 5 Setup Menu
- Chapter 6 Troubleshooting and Diagnostics
- Appendix A Interface Specifications and Cable Diagrams
- Appendix B Boot Manager
- Appendix C SNMP Management
- Appendix D Glossary
- DC Power Supply Connection
- Customer Response Form
Chapter 1 Introduction FCD-IPM Installation and Operation Manual
1-14 Technical Specifications
LAN Interface
Number of Ports
1 or 2
Standards
Conforms to Ethernet/IEEE 802.3
Types
10Base2 with BNC coax connector
10BaseT with RJ-45 connector
Internal Ethernet/Fast
Ethernet Switch
Interface
10/100 BaseT
Number of Ports
Four
Data Port Interfaces
Interfaces/Connectors
V.35 with 34-pin female via adapter cable
V.24/RS-232 or RS-530 with 25-pin D-type
female
X.21 with 15-pin D-type female via adapter
cable
V.36/RS-422 with 37-pin D-type female via
adapter cable
Fiber Optic Interfaces
Interface Options
850 nm LED
1300 nm LED
1300 nm laser diode
1550 nm laser diode
Connectors
ST
FC/PC
SC
Compliance
ITU G.921, G.956
Indicators
Power indicator (green)
Ready (green)
LINK (green)
100M (green)
LINK data (yellow)
LINK error (red)
RED alarm (red – T1 only)
YEL alarm (yellow – T1 only)
LOC sync loss indicator (red – E1 only)
REM sync loss indicator (red – E1 only)